產品分類 更多>>
INSULCAST 116FRRoom Temperature Cure, Equal Ratio Potting and Casting Compound.Insulcast 116FR is UL recognized under file E86165 & meetsthe flammability requirement of 94 V-0.D
聯(lián)系何經理Contact Manager He 
INSULCAST 116 FR is a one to one ratio (weight or volume) epoxy potting and casting compounddesigned for production use. The convenient mixing ratio of the material makes it ideal for productionline mixing as well as automatic dispensing.
INSULCAST 116 FRis among the safest epoxycompounds available. It appreciably reduces the risk of eye, skin or respiratory problems generallyassociated with the use of epoxycompounds.Properties Uncured
PROPERTIES UNCUREDate Co 聯(lián)系何經理Contact Manager He
Part A | Part B | |||||||
COLOR, VISUAL | Black | Neutral | - | |||||
VISCOSITY, cps | 7,200 | 11,000 | ASTM D 2393 | |||||
SPECIFIC GRAVITY | 1.5 | 1.45 | - | |||||
MIXED VISCOSITY | 8.100 | - | ||||||
POT LIFE, 100 gram mass, hrs | 1.5 | - | ||||||
GEL TIME, 25°C, hours | 3-4 | - | ||||||
SHELF LIFE, 25°C, months | 12 | - | ||||||
PROPERTIES CURED
| ||||||||
PHYSICAL | ||||||||
DUROMETER (Shore D): | 75 | ASTM D 2240 | ||||||
COMPRESSIVE STRENGTH, psi: | 12,500 | ASTM D 695 | ||||||
TENSILE STRENGTH, psi: | 9,500 | ASTM D 638 | ||||||
FLEXURAL STRENGTH, psi: | 10,000 | ASTM D 790 | ||||||
TENSILE ELONGATION, %: | 8.0 | ASTM D 638 | ||||||
FLAMMABILITY, UL 94V0: | Passes | |||||||
HEAT DISTORTION POINToC: | 70 | |||||||
SERVICE TEMPERATURE,oC: | -40-105 | |||||||
ELECTRICAL Electrical | ||||||||
DIELECTRIC STRENGTH, volts/mil: | 420 | ASTM D 149 | ||||||
DIELECTRIC CONSTANT, 1 KHz: | 4.4 | ASTM D 150 | ||||||
DISSIPATION FACTOR, 1 KHz: | 0.02 | ASTM D 150 | ||||||
VOLUME RESISTIVITY, ohm-cm: | 1x1014 | ASTM D 257 | ||||||
USE INSTRUCTIONS
1. Premix contents of each container before use to insure uniformity.
Some light settling may occur, but it will be soft and easily reincorporated.can cause contact dermatitis. Always wash exposed areas
2. Measure our equal volume or weight of each component and
mix together thoroughly. Be careful to scrape sides and bottom of container to incorporate all unmixed material, or serious loss of physical and electrical properties will result.
3. De-air (if necessary) at 29 in. Hg for 10 minutes.
4. Pour into cavity or mold.
5. Recover both containers immediately after each use to prevent contamination.
CURE SCHEDULE
Allow to cure 16-24 hours at room temperature (72°F).
To accelerate cure, allow 2 hours at room temperature (72°F),
then 130°F for 2 hours.
STORAGE REQUIREMENTS: IMPORTANT
This product has a tendency to settle upon shipment or storage
