電子電氣防火測試-其他常見測試方法： 

IEC電工標準：

IEC 60695-2-11: Glowing/hot wire based test methods-Glow-wire flammability test method for end-products.

IEC 60695-2-11: 著火危險試驗—第2-11部分—基于灼熱絲/發熱絲的試驗方法—最終產品的灼熱絲可燃性試驗

IEC 60695-2-12 (GB 5169.12) Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials

IEC 60695-2-12 (GB 5169.12) 著火危險試驗第2-12部分:基于灼熱/發熱絲的試驗方法材料的灼熱絲易燃性試驗

IEC 60695-2-13 (GB 5169.13) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignitability test method for meterials

IEC 60695-2-13（GB 5169.13）火災試驗—第2-13部分：發光/熱線為基礎的測試方法——灼熱絲材料可燃性試驗方法

IEC 60695-11-10: Fire hazard testing-Part11-10: Test flames – 50W horizontal and vertical flame test methods.

IEC 60695-11-10:評估火險的試驗—第11-10:試驗火焰—用50W試驗火焰進行水平和垂直試驗的測試方法 

IEC 60695-11-5：Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance

IEC 60695-11-5：著火危險試驗.第2部分:試驗方法.第2節:針焰試驗 (GB 5169.5)
 

中國標準： 

GB/T 2406.2 塑料 用氧指數法測定燃燒行為 第2部分：室溫試驗

GB/T 2406.2 Plastics – Determination of burning behaviour by oxygen index – Part2: Ambient-temperature test

GB/T 8924 纖維增強塑料燃燒性能試驗方法－氧指數

GB/T 8924 Test method for flammability characteristics of fiber reinforced plastic-Oxygen index method

GB/T 5169.5：電工電子產品著火危險試驗 – 第5部分：試驗火焰 針焰試驗方法 裝置、確認試驗方法和導則

GB/T 5169.5：Fire hazard testing for electric and electronic products – Part 5: Test flames – Needle test method – Apparatus, confirmatory arrangement and guidance
 

美國標準： 

ASTM D 2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

ASTM D 2863 測量支持塑料類似蠟燭燃燒的最低氧氣濃度（氧指數）的試驗方法 
 

國際標準： 

ISO 4589-3 Plastics — Determination of burning behaviour by oxygen index – Part 3: Elevated-temperature test

ISO 4589-3塑料—燃燒性能氧指數評定—3部分：高溫試驗
 

法國標準：

NF X70-100: Firebehaviour tests –Analysis of pyrolysis and combustion gases-Pipe still method

NF X70-100: 燃燒特性試驗-對高溫分解和燃?xì)獾姆治觥苁秸翩y法

NF X 10-702: Fire test methods-Smoke emission-Test of measurement of specific optical density of smoke by the combustion or the pyrolysis of solid materials

NF X 10-702: 防火測試方法—煙的散發—通過燃燒測量煙的可視度或通過高溫分解測量固體材料測量試驗
 

英國標準：

BS 2782-0:2011 Method 508A / BS 2782-0:2011: Methods of Testing plastic – Method 508A: Rate of burning, laboratory method

BS 2782: 塑料測試方法 – Method 508A: 燃燒等級，實驗室方法 ( Tpa & Tpb )
 

詳情請咨詢：中科易朔(廈門)防火技術服務有限公司

出自：GT2019.03