產品分類 更多>>
| 熱銷寶貝 |
輕型橫走式機械手LIGHT WEIGHT SIDLE ROBOT
結構和功能：
1.橫行軸采用無桿缸驅動或變頻馬達驅動（也可以選購AC伺服馬達驅動），上下及引拔軸使用氣缸驅動。
2.橫行、上下手臂均采用的高剛性鋁合金擠型梁與線性滑軌，配合高剛性軸承鋼，能達到取出速度快、能、高精度、使用壽命長的要求。
3.雙截式手臂采用特殊設計的皮帶倍速機構，可縮短上下手臂的結構高度，上下氣缸只需一半的行程即可達到全行程和配合廠房較低之場所。
4.側姿倒角機構可配合動?；蚨Ｈ〕龊凸潭ǖ菇?/span>90度。
5.治具預留氣壓管路與檢測訊號，預留一吸一抱兩個回路，可供吸夾抱等治具的取出應用，可應用于各種成品多樣化的取出。
6.無桿缸驅動TYA-550/650橫行軸采用無桿缸驅動，配合高剛性精密線性滑軌，動作平穩、順暢、耐磨和使用壽命長，兩端均采用氣壓緩行及油壓緩行器，停止平穩。
STRUCTURE AND FUNCTIONS:
1.Transverse axis is driven by shank-free cylinder or frequency-converting motor(or use AC servo motor for driving).The upperlower axis and crosswise axis are driven by the cylinder.
2.Imported high-rigidity aluminum-alloy beam and linear slide rail are employed for transverse move and upper/lower arm.Together with the application of high-rigidity bearing steel,the requirements of high-speed take-out,high efficiency,high precision and long service time can be met.
3.Specially designed belt multi-speed mechanism is employed for the double-load arm,which can shorthe the structural height between upper and lower arms.For the upper and lower cylinders,the full-stroke effects can be realized with the move of only half stroke.This design is particularly suitable for low-height plants.
4.Side beveling mechanism can be used with dynamic or fixed mold for take-out operation and provide a fixed beveling angle of 90 degrees.
5.Pneumatic pipeline and inspection signal are pre-set for the clamp,with two return circuits,for both sucking and holding.This structure can be used for such take-out operations of the clamp as sucking, nipping and holding,as well as for the take-out of various flnal products.
6.TYA-550/650 is driven by shaft free cylinder and with the high-rigidity and precision linear slide rail,can provide smooth and stable move,high wearability and long service time.Pneumatic and hydraulic retarders are used at the two ends.
人性化設計：
1.控制系統對話式操作，可以切換中文或英文頁面，操作簡單和容易學習。
2.8組內建標準程式和20組的模具記憶，可隨意搭配試用，具備L/U型取出功能，并可搭配置物方式，側姿選擇和頂針設定等功能。
3.自動檢測故障并自動記錄。
4.可在定模方向取出，搭配各項側姿動作，也可選擇不同的置料方式（橫出置料、橫入置料和外側同時置料）。
5.所有的計時、計數均可在自動運轉模式中修改。
6.模組化的控制板設計，更換維修方便；重視與射出機的連接安全規范，所有與成型機的輸入輸出訊號都使用干接點訊號，以防止相互干擾。
7.備用輸出點可以連接其他自動化設備，如輸送帶和承接臺等。
8.可選購CE機型，符合EUROMAP 12 or 67與SPI的標準，并附有標準接口。
9.可選購中板檢測和置物安全檢測等，搭配全廠自動化試用。
10.橫行軸可選購AC伺服馬達驅動，并采用精密級行星減速機和齒輪，齒條傳動，速度快、定位；定位度高達
