產品分類 更多>>
FLUXODUR 56-O
Self-Shielded Flux Cored Wire for Hard Facing
堆焊用自保護藥芯焊絲
Standards: DIN 8555 MF 6-GF-60-G
標準：DIN 8555 MF 6-GF-60-G
Applications & Properties:
特性和應用：
Alloy developped for the protection against mineral abrasion under tough constraints or shocks for temperature up to 350℃.
Good resistance to wear-off metal against metal.
Deposit of martensitic type.
Protection of wearing parts in civic construction field: teeth, cups.
Extrusion screw, cement clay, coal conveyors screws in mines,brick yards, quarries.
Deposit on manganese steel possible.
該焊絲是為防止強應力下的礦物質磨損和為防止350℃以下的操作溫度所產生的沖擊而設計的。
對金屬具有良好的耐磨損性能。
馬氏體型熔敷。
可以保護T.P.、輪齒、鏟斗等磨損件。
用于水泥廠、粘土廠、炭場、礦場、磚窯場的擠壓螺釘和輸送螺釘。
可以堆焊在錳鋼上。
Weld metal analysis (typical valus in%):
熔敷金屬的化學成份（正常值%）
C Si Mn Mo V Cr
0．50 3 2.50 0.6 0.4 9
Mechanical properties of deposited metal :
熔敷金屬的力學性能
Heat treatment / 熱處理狀態(tài) Hardness / 硬度[HRc]
As welded / 焊態(tài) 55-60
Stick Out: 30-35mm
Thickness of deposition: 2-3 layers
焊絲外伸長度：30-35mm
熔敷厚度：2-3 層
Type of Current/Polarity/Welding Positions :
電流/極性/焊接位置
