用途 ST-2型磨拋機是一種試樣制樣設備，主要適用于金相試樣和巖相試樣的研磨、磨光和拋光，供在顯微鏡下觀察與測定試樣的顯微組織。 本機備有帶旋塞的噴水管和排水管裝置，可進行濕磨。并可配上PD-1型試樣推移器進行半自動磨拋作業。 結構特征概述 磨拋機是以一臺交流雙速電動機通過三角皮帶傳動以獲得所需要的二重不同轉速。轉動平穩，噪音低。 整機由機殼、底座、機械傳動裝置、拋光盤、拋光罩、操作面板以及進排水裝置等基本部件所組成。 拋光織物通過O型橡膠圈牢固在拋光盤上，或采用帶有自粘性拋光織物粘貼在拋光盤上。通過選擇開關接通電源，使得跑光盤轉速符合工作的需要，便可用手對試樣施加壓力，在轉動的拋光盤上進行拋光。 本機還可配上PD-1型試樣推移器進行半自動磨拋。 在停止使用時對為防止灰塵及其他雜物落在拋光織物上而影響使用效果，所以本機備有罩及蓋。 Brief Description The grind-polisher is driven by a dual speed AC motor through V belt to obtain the required two different speed . The machine rotaes smoothly with noise. The machine is composed of housing, base mechanical trans mission device, polishing disk, polishing cover, operating panel as well as inlet and drainage device. The polishing cloth is fastened to the polishing disk through “O” rubber ring or by self-adhesive polishing cloth adhered to the polishing disk., Swith on power supply through selector switch to obtain the required speed of the polishing disk. Then apply pressure to the specimen by hand and perform polishing on the rotating polishing disk. The machine can be operated with PD-1 Push-Shifter for semi-automatic operation. The machine is provided with cover and lid to prevent dust and other imputrities form falling on the polishing cloth to impair the operation effect when machine is not in use. This machine equipped with sprinkler and drain piper for wet grinding. This machine can be used with PD-1 Push-shifter for semiautomatic operation of grinding and polishing. 技術參數 1.磨拋盤直徑 Φ200mm 2.磨拋盤轉速 具有三種變速規格可供用戶選用 Three speeds to be selected by user 1000r/500min 800/400r/min 500/250r/min 3.電動機 0.37/0.25kw,三相3PH 380V ,50Hz 4.外形尺寸 360x590x560mm 5.凈重 35kg PANER品牌經營的磨拋機有：臺式雙速磨拋機ST-2、臺式無極變速磨拋機ST-W 、單盤立式無極變速磨拋機SV-W；、雙盤四速磨拋機DT-4、雙盤臺式無極變速磨拋機 DT-W 、雙盤柜式無極變速磨拋機DV-W；另外還有磨拋機、全自動磨拋機、半自動磨拋機、手持磨拋機、金相磨拋機、巖相磨拋機、試樣磨拋機、磨平機等可以根據客戶需要加工定做。