高光過熱水高光注塑模溫控制機 高光過熱水模溫機特點： 消除產品表面溶接線，溶接痕，波紋，銀絲紋。 Remove the welding wires and traces, ruffles and silver marks on product surfaces. 徹底解決塑料產品的表面縮水現象。 Solve the surface shrinkage of plastic products completely. 提品表面光潔度，使表面光潔度可達到鏡面。 Enhance the product surface as smooth as a mirror. 產品不需要噴漆后續加工，提高成品率20-30%。 It is unnecessary to conduct processing after spraying to products, increasing the rate of finished products by 20% to 30%. 解決加織產品甩產生的浮織現象使品質更完美。 Solve the float phenomenon of woven products, ensuring better quality. 使薄壁成型提高注塑流動性，提品品質和強度。 Make thin walls formed, so as to improve the fluidity in injection molding and product quality and strength. 使厚壁成型注塑周期可降低60%以上，增強塑料的流動性及填充效果。 The injection molding period for the thick wall forming may be reduced by over 60%, improving plastics’ fluidity and filling effect. 95%的熱能回收。 95% of heat energy may be recovered. 的介質回收。 The medium may be recovered completely. 無需連接鍋爐及其他外置溫控輔助設備，省略復雜的鍋爐設備（高壓設備安全和環保的審批）和管道工程。 It is unnecessary to connect it with a boiler or other external auxiliary temperature controlling equipment, avoiding the application of complicated boiler plants (the approval of the safety and environmental protection performance of high-pressure equipment) and pipe works. 完全解決鍋爐之蒸汽不可回收的能耗大問題。 Solve the great energy consumption of boilers due to steam cannot be recycled. 體積小可隨時移動配合不同機臺使用，180℃熱水完全代替鍋爐的不環?，F(xiàn)象。